We were in the tub late last night, cold out (28F) and snowing. When you turn on the LED lights, the color rotates. Wife wanted to lock in the red color and when we pressed the light mode button, the top side LED lights flickered(reminded me of short in a circuit) then color continued to rotate. Pressed the light mode button again, same thing. Pressing the light mode button a third time made all LED lights go out, only the tub well light was lit in blue. Neither light button on the top side control panel would respond to inputs.
I went over to the cut off box and pulled the bar to cut power to the tub. Waited ten seconds and put bar back in. The tub started up, light on/off button worked but the color mode button did the same thing as above so we just turned off all lighting as we hate color rotation.
This morning I went out and checked the light mode function and it is working as expected. I searched many forums and the Internet but can't find anything like this.
Followed wires to a light controller, doesn't look like something that's easy to troubleshoot. Anyone have a suggestion?
I went over to the cut off box and pulled the bar to cut power to the tub. Waited ten seconds and put bar back in. The tub started up, light on/off button worked but the color mode button did the same thing as above so we just turned off all lighting as we hate color rotation.
This morning I went out and checked the light mode function and it is working as expected. I searched many forums and the Internet but can't find anything like this.
Followed wires to a light controller, doesn't look like something that's easy to troubleshoot. Anyone have a suggestion?