- Mar 16, 2017
- 47
- Pool Size
- 11700
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- Hayward Aqua Rite (T-3)
Hello everyone!
We upgraded from an above ground pool to an inground fiberglass pool this summer--best decision ever! I'm still getting the hang of my new equipment, but so far, it's been super low maintenance!
I have 2 questions:
1. My TA is consistently around 120. I remember I had the same issue in my above ground pool. Is this something I should be concerned about considering that TA is typically very high in this area?
2. My CYA is reading roughly 100 for a few weeks ago. Is this a concern? Should I be draining and adding fresh water? I've added very little bleach to the pool...less than a gallon total when I was getting the hang of my equipment and let it get too low. So, advice on keeping it controlled would be helpful as well.
Thank you all so much!
We upgraded from an above ground pool to an inground fiberglass pool this summer--best decision ever! I'm still getting the hang of my new equipment, but so far, it's been super low maintenance!
I have 2 questions:
1. My TA is consistently around 120. I remember I had the same issue in my above ground pool. Is this something I should be concerned about considering that TA is typically very high in this area?
2. My CYA is reading roughly 100 for a few weeks ago. Is this a concern? Should I be draining and adding fresh water? I've added very little bleach to the pool...less than a gallon total when I was getting the hang of my equipment and let it get too low. So, advice on keeping it controlled would be helpful as well.
Thank you all so much!