Azgirl71 recommended it to me and I am glad I took her advice. Really made a much cleaner fit and with a little petroleum jelly I had no leaks and it looks smooth.
Each inlet/outlet fitting only come with one and it is nice to have one on both sides.
I had to grind out the skimmer hole a little extra but not much at all. Super tight fit, was a little worried about the threads but all is good.
No problem cutting out the vinyl. Traced out the gasket like instructed then used a pair of scissors and stayed on the inside edge of line. X-acto knife might have been easier but i don't know, easy either way...Just don't slip
Water after sitting for a week with out a filter. Other than me tossing some liquid bleach in and stirring it up a bit :-/
I put leaf trap gasket in wrong place i.e. need for a knife and fork. lol, busted. Working great!
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.
Welcome to TFP! For a wealth of pool care information please check out our free Pool School. If you are in need of specific help then we encourage you to Register and ask us here in the forum!