I have an 11000 gallon pool and want to have the liquid chlorine addition automated. Can you guys help me on what to do? Not sure about pump sizing and where do you tie it into the system. I currently have a 3 inch puck chlorinator that has a thread hole plugged off. I could add the stenner there no problem if that would work and have 110v recepticle real close. Just would need a timer system. I noticed some of the stenner pumps come with a built in timer. The econ T does atleast.
Other possible issue. I shut off my pump by flipping the breaker in my basement. That same breaker will kill power to the place I would plug in the stenner. So I can only assume it would mess up the built in timer. Unless it has memory. Might have to rethink my pump shut down procedure. And put in a real pool pump timer.
Other possible issue. I shut off my pump by flipping the breaker in my basement. That same breaker will kill power to the place I would plug in the stenner. So I can only assume it would mess up the built in timer. Unless it has memory. Might have to rethink my pump shut down procedure. And put in a real pool pump timer.