Starting a 24' round salt above ground pool. My water is green. My question is WHEN to SLAM during the opening process. Do I balance my other chemicals first? Or only balance a few then slam? Or just slam?
Starting a Green Pool when to SLAM
- Thread starter G0R1LLAMUNCH
- Start date
-
- Tags
- opening the pool slamming
clambert1273
Gold Supporter
- Jun 13, 2013
- 1,513
- Pool Size
- 12000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool Edge-40
I would say, get PH to 7.2 and slam away. Make sure you know CYA level for sure
- Jun 22, 2014
- 52,017
- Pool Size
- 17888
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-45 Plus
Christina has the right idea. The only other thing to consider, if it's a factor for you, is the cost and availability of liquid chlorine in your area. You will probably go through quite a few gallons. So if cost or availability is an issue, some people opt nowadays to do a partial water exchange since the water is cheaper in some areas. They still have to do the SLAM Process, but it helps a bit.
Once you confirm your CYA, go to the FC/CYA Levels to find your proper FC (SLAM) level and go for it.
Once you confirm your CYA, go to the FC/CYA Levels to find your proper FC (SLAM) level and go for it.
clambert1273
Gold Supporter
- Jun 13, 2013
- 1,513
- Pool Size
- 12000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool Edge-40
38 gal!? WoW. Thick enough to hold a spoon upright?Lol guess I don't think about that since I just did 38 gallons on mine
BTW, Thanks for the initial reply.Never thought about the just switch the water, I don't have a water meter so this would be way cheaper. Cheers
clambert1273
Gold Supporter
- Jun 13, 2013
- 1,513
- Pool Size
- 12000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool Edge-40
It was really really bad38 gal!? WoW. Thick enough to hold a spoon upright?