New DE filter and multiport valve mocked-up in place. Good news is the RETURN port of the multiport valve is facing the heater now. Bad news is the heater input is misaligned by abt 1/2".
Can't move DE filter the way I need to go since its as close to house as it can be and still get band clamp on/off.
Heater outlet pipe hould have to be shortened abt 1/2" (just before checkvalve) to move heater to right way. Propane line would also need tweaking. I'd rather not move heater but may have to.
I could rotate the DE filter and get alignment ok between multiport valve and heater inlet, but WASTE port wouldn't be square with existing waste pipe. (Maybe a 2" hose could be used to couple waste lines since there no serious press there??)
Is there a such thing as a 10 or 15 degree elbow for 2" PVC? I placed a scrap piece of 2"PCV in RETURN port of multivalve to show the misalignment with heater input.
Can't move DE filter the way I need to go since its as close to house as it can be and still get band clamp on/off.
Heater outlet pipe hould have to be shortened abt 1/2" (just before checkvalve) to move heater to right way. Propane line would also need tweaking. I'd rather not move heater but may have to.
I could rotate the DE filter and get alignment ok between multiport valve and heater inlet, but WASTE port wouldn't be square with existing waste pipe. (Maybe a 2" hose could be used to couple waste lines since there no serious press there??)
Is there a such thing as a 10 or 15 degree elbow for 2" PVC? I placed a scrap piece of 2"PCV in RETURN port of multivalve to show the misalignment with heater input.