Spa Water Level Low - Pool High

garywi

0
Silver Supporter
Jul 12, 2013
144
Phoenix, AZ
Hi Guys, new for 2020. The water in my spa is 4 inches low. The water in pool is high. This is after the filter runs at night. Thanks
 

Attachments

  • 7206073B-5557-4A47-A46B-A4F0D6F9F73E_1_201_a.jpeg
    7206073B-5557-4A47-A46B-A4F0D6F9F73E_1_201_a.jpeg
    892.5 KB · Views: 7
  • BD3F750B-5AA9-4E87-98F9-D9DAEB037FE3.jpeg
    BD3F750B-5AA9-4E87-98F9-D9DAEB037FE3.jpeg
    818.6 KB · Views: 7
Look for a check valve on your make up line to the spa. Take a picture of it and post. We can provide guidance on repairing.
 
Look for a check valve on your make up line to the spa. Take a picture of it and post. We can provide guidance on repairing.

Thank you. I have two check valves, they look the same. I think one is for spa and one is for floor cleaning, I think
 

Attachments

  • E62BA0F3-C051-43E5-A701-E580237FB1D6.jpeg
    E62BA0F3-C051-43E5-A701-E580237FB1D6.jpeg
    357.2 KB · Views: 4
  • A40791F6-5E87-4974-91BC-2DBEB963EFC7.jpeg
    A40791F6-5E87-4974-91BC-2DBEB963EFC7.jpeg
    367.1 KB · Views: 4
Gary,

Take a couple of pics from a little farther back, so we can see the associated valves.. Most likely the one for the spa is leaking when the pump is off.

If we can see more of the plumbing, we should be able to tell which check valve is for the spa.

Thanks.

Jim R.
 
  • Like
Reactions: mknauss
Thread Status
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.