New to the forum! Awesome site! Hoping I can find some help here on this...
New pool/spa combo, just built in Oct 2013. All Jandy equipment, stealth pump, legacy heater, aquapure swg, cv340 filter, pda, and aqualink.
Here's the issue...I turn on the spa heater when in spa mode and everything is working great. While in the spa the outside temp drops enough to enable freeze protection. When we're done in the spa, I turn the heater off first, then spa mode to off via the PDA. The freeze protection takes over and enables the equipment. The next morning when it warms up to disable freeze, the spa mode goes back on and the heater kicks on again. I turned it off the night before! Luckily I saw this happening, so hopefully the gas bill won't be bad. Anyone have any input on this? Am I turning the equipment off wrong? Thanks!
Ph - 7.6
CH - 260
Alk - 70
FC - 5
CYA - 50
New pool/spa combo, just built in Oct 2013. All Jandy equipment, stealth pump, legacy heater, aquapure swg, cv340 filter, pda, and aqualink.
Here's the issue...I turn on the spa heater when in spa mode and everything is working great. While in the spa the outside temp drops enough to enable freeze protection. When we're done in the spa, I turn the heater off first, then spa mode to off via the PDA. The freeze protection takes over and enables the equipment. The next morning when it warms up to disable freeze, the spa mode goes back on and the heater kicks on again. I turned it off the night before! Luckily I saw this happening, so hopefully the gas bill won't be bad. Anyone have any input on this? Am I turning the equipment off wrong? Thanks!
Ph - 7.6
CH - 260
Alk - 70
FC - 5
CYA - 50