Good evening everyone,
So last week I slammed and performed a successful OCLT. However, there was still an ever so slight cloudiness..just slightly. That said, as per suggestions here, I deep cleaned and backwashed my filter (heck of a lot of fun and learning experience!!)
I added the salt last night...ran nearly 36 hours and just performed my test.
Here are the results...(and boy am I worried!!!)
Salt - 2000ppm
PH - 7.2
BR - 1 (weird - usually always 5)
FC - 2
TA - 60
CH - 75
CYA - 60
I have turned the SWG on to 100%...water temp is roughly 65-70F. I know I need to add a lot more salt...6500ppm? Right...?
Also, when I brush the floor of the Pool..a small green/brown plume of darn algae (I’m assuming) follows in it track.
I’m assuming...I must start the SLAM over again?
Thanks all for your help.....I wonder what happened?
So last week I slammed and performed a successful OCLT. However, there was still an ever so slight cloudiness..just slightly. That said, as per suggestions here, I deep cleaned and backwashed my filter (heck of a lot of fun and learning experience!!)
I added the salt last night...ran nearly 36 hours and just performed my test.
Here are the results...(and boy am I worried!!!)
Salt - 2000ppm
PH - 7.2
BR - 1 (weird - usually always 5)
FC - 2
TA - 60
CH - 75
CYA - 60
I have turned the SWG on to 100%...water temp is roughly 65-70F. I know I need to add a lot more salt...6500ppm? Right...?
Also, when I brush the floor of the Pool..a small green/brown plume of darn algae (I’m assuming) follows in it track.
I’m assuming...I must start the SLAM over again?
Thanks all for your help.....I wonder what happened?