- May 23, 2022
- 13
- Pool Size
- 13090
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-40
Put in a pool last year, so far so good. Had a company close the pool for me and they are coming back in about 10 days to open the pool. I just opened a corner of the cover to drain about an inch of water since we've had some heavy rain and the level is almost overflowing the skimmer. The pool is very green, lots of algae on the sides and bottom.
Should I wait to run the robot until they open the pool or should I start it to try to clean up a bit before they get here? Not sure if stirring things up will make it worse. Pool has a SWG and they put chlorine in before closing but it's reading zero at this point, no surprise.
Edit: I just found a similar question from someone else. I guess the only additional thing I'm wondering is if I should throw in some bleach to try to kill off the algae or just run the robot to clean what it can but otherwise leave it alone?
Should I wait to run the robot until they open the pool or should I start it to try to clean up a bit before they get here? Not sure if stirring things up will make it worse. Pool has a SWG and they put chlorine in before closing but it's reading zero at this point, no surprise.
Edit: I just found a similar question from someone else. I guess the only additional thing I'm wondering is if I should throw in some bleach to try to kill off the algae or just run the robot to clean what it can but otherwise leave it alone?
Last edited: