Short in IC40 power cord plug

[tennfly]

I have a IC40 four prong plug-in to the power center. There is a poor connection at the plug-in spot. I have had trouble with the connection last season. This season I just can't get a good connection. I have cleaned the prongs, and did work for 3 days, but now I can't get power to the cell, except momentarily. I don't know if it's the female plug on the power center or the male plug coming from the salt generator. One prong is corroded and I cleaned it the best I could. Is there a part to buy to replace the IC40 power cord? I can't seem to find it online.
Danny

 

[ajw22]

See this thread for information on the cable and connectors...

Corroded power connector on Pentair IC40

I replaced my Pentair IC40 in April this year and it has just failed with communication error due to water getting into the the connector and corroding the pins. I live in Florida where water and heat is always a problem. I thought the solution was going to be easy. Cut off the old connector and...

www.troublefreepool.com

 

[pjt]

One prong is corroded and I cleaned it the best I could.

Did that solve your problem? I had the exact same problem a few months ago and cleaning the pins and sockets fixed it.

 

[Jimrahbe]

Danny,

Try this .. Amazon.com

Thanks,

Jim R.