ScreenLogic Reads Status But Won't Send Changes to EasyTouch

[MJM AZ]

The RS485 chips in the Protocol Adapter can be replaced. If you know how to solder or have an electronics shop available, you can get the chips for really low price.

I have a similar issue - can see information in my screenlogic app on PC and phone, but cannot transmit commands. Started a week ago. Is it the TX chip in the protocol adapter or Rx chip in outside antenna? How to tell the difference?

 

[mknauss]

I believe the Antenna has lights on it. I do not have one as I use a wireless bridge with the protocol adapter in the Easytouch box.

Pentair Automation Systems - Further Reading

www.troublefreepool.com