Screenlogic failure question

[SteveK52]

If my pump etc. is running from a program within Screenlogic and the Screenlogic interface fails will the programs still run?

 

[mknauss]

Yes. Screenlogic is an interface. The programming all resides in the Easytouch.

 

[Jimrahbe]

Steve,

I agree with Marty, except where the ScreenLogic antenna fails and loads down the RS-485 port.. This will cause anything on the RS-485 com port to not work. But everything not RS-485 will work just fine.

Thanks,

Jim R.