In your example, neither the High Speed line turns green, nor does the pump increase speed.Scott,
I asked about the egg-timers because you can only have 12 total schedules and that includes the egg-timers not at the default time..
Just to be clear.. Are you saying that at 7 am, your 'High Speed' does not turn green? Or are you saying that your pump does not change speeds?? These are two very different things.
Please tell me what pump speed is associated with your schedules.
I don't understand why you have a 'Pool speed' circuit and a 'Pool' circuit???
I assume you want the Pool Circuit to be on 24/7.. To do that it is best use the same start time and stop time.. Like... 8 am to 8 am. (That should not be your problem..)
Show me a pic of the screen on your EasyTouch..
Thanks,
Jim R.
Well, in taking the picture of the 3” lcd, I think I see the problem. The clock is 12 hours ahead. And, turns out pump was running at high speed and reflected accurately in the app - is it beleive it’s 7:55 am on Monday - when it’s really 7:55 pm on Sunday.I'd like to see the little 3" LCD screen on the EasyTouch panel..
On the surface, I don't see why it is not working...
But... I just upgraded to the IntelliCenter and deleted the two ScreenLogic apps.. I rarely used my phone, as the PC make programming about 10 times better.. So, I don't remember what my phone screens looked like..
Nothing to do with your problem, but it seems like you are running your pump way too fast. Unless you have a Spa, 3200 is insane.. I 'assume' that you have an IntelliFlo pump???
Do you have ScreenLogic and SLConfig?? You really need both to program. If you have an old PC you might want to load ScreenLogic on it and use it to troubleshoot.
Let's see what Tom has to say... Calling @ogdento
Thanks,
Jim R.
Ja,I'm tempted to tell you to delete all those schedules, make sure your feature circuits are named properly and pump speeds are assigned properly and start over.
Thanks for the feedback. I will try to get ScreenLogic on a pc.Ja,
If the OP had ScreenLogic on his PC, that is exactly what I would have suggested..
Ten minutes and you are done..
Jim R.