SCG (IC60) is tripping the breaker

[DennisScherping]

The breaker is tripping for the SCG on my Pentair Intellicenter System. The breaker trips with the cell disconnected and I've replace the breaker. I assume the problem is the SCG Load Center Surge Board. My part number is 521593.
Questions:
1. Is the board repairable? Is there a schematic available?
2. There are Yoursme boards available on Amazon for $86. Will this board work or should I buy the OEM one?
3. Do I need a new connector for JP2? Is the existing connector removable from the board?

Thanks,
Dennis

 

[mknauss]

Pentair Intellichlor ICXX SWG - Further Reading

www.troublefreepool.com

 

[ajw22]

1. Is the board repairable? Is there a schematic available?

No.

2. There are Yoursme boards available on Amazon for $86. Will this board work or should I buy the OEM one?

We do not know how well cheap Chinese clone boards may work.

3. Do I need a new connector for JP2? Is the existing connector removable from the board?

Yes, it is removable.

 

[DennisScherping]

I purchased a QHHR brand load board from Amazon for $80. It fixed the problem. It's been working for 2 weeks. The J9 connector is bigger than on the original board so I had to cut and crimp a new connector to one of the wires. The old board may be repairable. It appears that the bridge rectifier is bad.