hello. I have a save-t 3 auto cover that is not opening. I have had this problem on and off for several summers. pool co will send someone out, who adjusts or tightens something and it works again, for a while. I always watch them to see what they are doing so I can hopefully notice the problem when it happens again. motor is ok, cover and components are checked and serviced by pool co at opening and closing. there are things I can tighten/adjust but I hate to just start touching stuff and make it worse. does anyone have a suggestion on what part/area should be looked at?
Save-T 3 auto cover not opening
- Thread starter kkapolas
- Start date
Is it making any noise, such as clicking?
Take a look at this older thread and see if anything rings a bell?
www.troublefreepool.com
Maddie
Take a look at this older thread and see if anything rings a bell?
Automatic cover gear issue
My auto cover sheared a bolt but i am unsure if previous owners had it jerry rigged or what i need to do. Is there a special hardware piece to fit both sides of these holes? When i wedge a bolt in there the cover opens and closes. When it falls out it just spins the shaft so i know something...
www.troublefreepool.com
Maddie