OK
Each time I think I do, it seems like things start going sideways...You got this!
Tomorrow is another day!
Saltwater Pool Disaster!
- Thread starter lanikaigirl
- Start date
Tomorrow is another day!
- Jun 22, 2014
- 52,091
- Pool Size
- 17888
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-45 Plus
Not until you pass all 3 SLAM criteria. Complete the SLAM first. Then you can raise the CYA from 30 to 70 to help your SWG work more efficiently..
So, if FC was back to 12, this morning, after adding bleach last night, do I keep testing through today, to see if it stays up?
The water is still a little cloudy.
Is that when we turn on SWG?So, if FC was back to 12, this morning, after adding bleach last night, do I keep testing through today, to see if it stays up?
The water is still a little cloudy.
- Jun 24, 2021
- 16,775
- Pool Size
- 29000
- Surface
- Vinyl
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-60 Plus
Yep! Do it every 1-2 hours and your slam will take less time. After you pass all three criteria for SLAM, then you can let FC drift down, then turn on SWCG.So, if FC was back to 12, this morning, after adding bleach last night, do I keep testing through today, to see if it stays up?
The water is still a little cloudy.
- Jun 22, 2014
- 52,091
- Pool Size
- 17888
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-45 Plus
It's great the FC is holding. Cloudiness is always a concern. Please try to continue with the SLAM Process and let's see what happens this evening and make a decision tomorrow. Sand filters can be a little slow filtering out all the residual stuff, but we can address that tomorrow.
I'm really struggling to keep the FC level up--the last test showed a drop from 12 to 9 in just two hours, with solid cloud cover. I guess that means it's still killing off lots of contaminants...? 
Yes. Although if your CYA is below 30, some of the loss could be from UV as it gets through the clouds. However, 3ppm loss in 2 hours on a cloudy day is most likely organics still growing in your pool.
If it’s at 30ppm, I’d keep it there until done with the SLAM. If you raise it, you’ll need to raise the SLAM chlorine level to match it. If you do raise it, don’t go above 40.
The FC was at 12, just now (10:30 a.m.) after reading 14, 11 hours ago (11:48 p.m.)
I'll keep checking levels every hour, or so, keeping it at 12 throughout the day, right?
I'll keep checking levels every hour, or so, keeping it at 12 throughout the day, right?
You should be checking it earlier in the morning to do the chlorine loss test. You want to test AFTER light stops hitting the water and BEFORE it starts hitting it again in the morning. 10:30am is a little harder to tell if the loss is coming from sunlight or algae.The FC was at 12, just now (10:30 a.m.) after reading 14, 11 hours ago (11:48 p.m.)
I'll keep checking levels every hour, or so, keeping it at 12 throughout the day, right?
The FC level needs to be maintained at SLAM level until you pass the OCLT.
The FC was at 12, just now (10:30 a.m.) after reading 14, 11 hours ago (11:48 p.m.)
I'll keep checking levels every hour, or so, keeping it at 12 throughout the day, right?
The water is clear-- if the FC stays at 12 overnight, am I done SLAMing? If so, what do I do next?
- Jun 24, 2021
- 16,775
- Pool Size
- 29000
- Surface
- Vinyl
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-60 Plus
Make sure you test 30 minutes after final chlorine/bleach addition with the pump running. Make sure to test before the sun hits the pool in the morning. You indicated that you tested at 10:30am. Sun could/did hit pool and consume some FC. Test before sunrise.
GOOD MORNING!!!Will do--thanks!
I think we made it! After 15 days, 22 gallons of bleach, overnight FC-12, CC-0, clear, sparkling water, this morning-- it's a BEAUTIFUL DAY!
THANKS for all the help, my fine Forum Friends--let me know if you think I've missed anything.
