- Sep 2, 2024
- 5
- Pool Size
- 9000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Hayward Aqua Rite (T-9)
Hey all sorry for the basic question. I am trying to get my hayward tristar vs 950 pump connected to my nixie standalone system via rs485 connection via building automation hat on a raspberry pi. Any help would be greatly appreciated!
I am directly wiring the 3 wires from pump (A,B, and Ground) directly to the Building auto Card rs485 port. I have set jumpers all down on pump and believe all connections are clean and secure.
I setup my building automation hat to have:
I am directly wiring the 3 wires from pump (A,B, and Ground) directly to the Building auto Card rs485 port. I have set jumpers all down on pump and believe all connections are clean and secure.
I setup my building automation hat to have:
- jumpers to enable the rs485 port (both rx and tx),
- sent command to release control of the rs485 from the building automation card controller.
- ~$ megabas [0] rs485wr 0 0 0 0 0
Last edited: