Return Jet Identification?

curtisb

Active member
Dec 6, 2021
33
N Las Vegas, NV
Pool Size
10000
Surface
Plaster
Chlorine
Liquid Chlorine
Hi,
I am trying to see if I can change the attached pictured return jet to the adjustable eyeball. The current jets are not adjustable (I actually had the whole inside mecahnism drop in my hand while trying to adjust. I need to get the "special spanner screwdriver" or aC clamp pliers to screw the insides back on..

TIA.

Also can you see my pool logs in my signature? I clicked to share in Pool Math?

Curtreturn 2.pngReturn Jet.png
 
I think you have Aquastar return jets.


You can buy a Hayward eyeball and see if it fits. Or look on the Aquastar website for what they have.


Yes, I can see your PoolMath logs.

Your CSI is high due to your high CH. Keep an eye on that and keep your pH and TA low to lower your CSI.
 
Copy that..here
I think you have Aquastar return jets.


You can buy a Hayward eyeball and see if it fits. Or look on the Aquastar website for what they have.


Yes, I can see your PoolMath logs.

Your CSI is high due to your high CH. Keep an eye on that and keep your pH and TA low to lower your CSI.
I live in vegas and just checked the fill water and it sits at 250...so that sounds like it going to be a partialdrain and fill....unless I'm missing something?? I just added 64 oz of acid yesterday so hopefully that will bring down the ta and ph. I did an overnight fc and it was right at 1. The sunrise to sunset was 2 so maybe 3 cups a day

Thanks
 
Thread Status
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.