I'm in the middle of a remedial restoration of the above mentioned pool. We were going to do a full comprehensive remodel in the future, but have to do a quick cosmetic job because our house (and pool) is being used as a filming location for most of March. That said we though it might need a full replastering, but it turns out the concrete pool has has so many paint jobs that a sandblasting and high quality epoxy coating (studio paid for) might last a while longer than we originally thought. The pool itself is an engineering marvel. It projects from a grade and has two dressing rooms (with showers) and a bathroom underneath . The equipment is located in an adjacent basement. It needs a lot of plumbing. Right now only the bottom drain and a "Float Around" skimmer are in effect. The original "raceway" is outdated and mostly plugged. To add a wrinkle to the issue we had a light niche that was cemented over, upon prepping it for paint we found out that it was actually boarded up with WOOD and epoxied/coated with some sort of ancient adhesive. We thought we could install a new light/niche but unfortunately its 11" square! I have been unable to locate a NOS or even new square light. (why square?) See images. FYI that is not mold, it's old black paint.
Attachments
Last edited: