Resilience E series - anybody using this ?

Jump to latest Follow Reply
M

mergyu71

Member
May 26, 2023
22
Connecticut
Hi all!

We are in the middle of a pool renovation. My pool builder is putting in Resilience E series made by Magen eco energy. I also looked up this product and it is already discontinued. Anybody still using this SWG? Any problems/issues encountered with this product? Should I tell my pool builder to put in a different one? Will this be sufficient with my 20x40 pool? Are some of the parts of this product still for sale(example: salt cell)?

Thanks!
 
It looks like it's similar to the Circupool Core series. Most likely, there are probably different models for different size pools. We recommend SWGs be rated at twice the volume of your pool. I would steer clear of a system that's already obsolete. See if your pool builder can set you up with a circuit pool RJ series. It's well regarded here, and carries a pretty good warranty.
 
Rancho Cost-a-Lotta said:
It looks like it's similar to the Circupool Core series. Most likely, there are probably different models for different size pools. We recommend SWGs be rated at twice the volume of your pool. I would steer clear of a system that's already obsolete. See if your pool builder can set you up with a circuit pool RJ series. It's well regarded here, and carries a pretty good warranty.
Click to expand...
Ok, thank you. I will open this up to him. My pool is 20x40 4 feet shallow and 8-9 feet deep. Calculated it around 35,000-39,000 gallons. Should go with RJ-45 or RJ-60?
 
To be clear, I would not accept a discontinued item in a build or renovation unless it was free.
 
You must log in or register to reply here.
Thread Status
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.
Top Bottom
Back
Jump to latest Follow Reply