I am trying to get my filter to stop leaking. I try following the instructions (alternating sides as I tighten clamps), but the filter still leaks. Is there a trick to this?
Thanks for the reply. I was talking about the entire filter, not something that would use an O-ring. I finally got it working. I had to make sure the clamps were aligned carefully before tightening them, because they do not align themselves.
Thanks for the reply. I was talking about the entire filter, not something that would use an O-ring. I finally got it working. I had to make sure the clamps were aligned carefully before tightening them, because they do not align themselves.
So glad I saw this. Took mine apart this past weekend to hose the cartridges down and now, after putting everything back together, there's a very slight water drip from under one section of the "lip?" Looks like I'll be redo-ing it this coming weekend. I noticed too that a couple of the spokey-wheel things that fit over the large screws (sorry, not familiar with terminology) broke in half so I just left them off. Do you think I should try to track down replacements?
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.
Welcome to TFP! For a wealth of pool care information please check out our free Pool School. If you are in need of specific help then we encourage you to Register and ask us here in the forum!