Recommendations for test results

[Larryaugust]

FC - 3.8
PH - 7.6
TA - 280
CYA - 60PPM
CALC. HARD. 100PPM
Suggestions on what to adjust first to try and get the perfect balance.

 

[mknauss]

Maintain FC in target range for your CYA using FC/CYA Levels

That's it!

 

[duraleigh]

Your numbers look good. What does your water look like?

 

[Larryaugust]

Maintain FC in target range for your CYA using FC/CYA Levels

That's it!

You dont think i need to adjust the ta and calc. H to get them in thw proper range?

 

[Larryaugust]

Your numbers look good. What does your water look like?

Water looks good! Couple backswimmers and a little brown film that settles on bottom i cant seem to get rid of completely

 

[JJ_Tex]

What is the TA of your fill water?

With high TA, high CYA, and a pool under 7k gallons, I would be tempted to change out half the water to lower the CYA. Then you can SLAM to get rid of that "little brown film". Hopefully it is a quick SLAM.

 

[mknauss]

As far as you TA and CH, nothing to act on. The TA will fall over time as you keep the pH in the 7's. You have a vinyl liner, so low CH is of no concern.

As JJ stated, if you are seeing dead algae (that little brown film), you should SLAM. You can do it at your current CYA if you like. Follow the SLAM Process

 

[Larryaugust]

thanks for the replies. Really appreciate the input!