Please help.....my pool will not clear. Obviously I closed too early last year and had a massive algae bloom. Been brushing at nite and vacuuming during day. Started SLAM 6 days ago and pool won’t clear.
Today
FC 15
CC 1
PH 7.2
TA 100
CYA 30
Pool doesn’t lose that much chlorine during the day...at most 4ppm and 1-2 over night. I have water sitting at room temp now as I read that maybe the pool temp is too cold for accurate CYA reading. All chemicals are newly replaced.
Upon opening, my pump was seized and pool
comoany replaced it for $600. I’m wondering if that could somehow be the issue.
I seriously dont don’t know what I’m doing wrong and why it won’t clear. I have been vacuuming blindly because I’ve yet to see the bottom. Shouldn’t it be clear by now? I have seen Somewhat of an improvement from horrible swamp color to a light green but that’s it.
Any and ALL help would be greatly appreciated!!!
Today
FC 15
CC 1
PH 7.2
TA 100
CYA 30
Pool doesn’t lose that much chlorine during the day...at most 4ppm and 1-2 over night. I have water sitting at room temp now as I read that maybe the pool temp is too cold for accurate CYA reading. All chemicals are newly replaced.
Upon opening, my pump was seized and pool
comoany replaced it for $600. I’m wondering if that could somehow be the issue.
I seriously dont don’t know what I’m doing wrong and why it won’t clear. I have been vacuuming blindly because I’ve yet to see the bottom. Shouldn’t it be clear by now? I have seen Somewhat of an improvement from horrible swamp color to a light green but that’s it.
Any and ALL help would be greatly appreciated!!!