- Apr 10, 2018
- 6,544
- Pool Size
- 18375
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-45 Plus
How is the existing system controlled? What type of a timer or device switches the existing SWG on and off?
Re-Plumb salt water generator
- Thread starter Ccorbin28
- Start date
Jandy vs-fhp2.0 pump, Jandy JEP-R Timer and the timer appears wired directly to the pump with the low gauge wiring and the salt controller with the big conduit to the pump separately. Nothing appears connected from salt cell control box to timer.
Picture is of the connection from timer to pump and salt cell to pump
Attachments
New salt cell only provided 4’ of electrical cord. That’s the other end of the conduit coming from the pump to the old controller.
Cut the wires of the old wiring connect them with a button connector heat shrink to the new wiring and I shouldn’t have to worry about wiring the pump?
Cut the wires of the old wiring connect them with a button connector heat shrink to the new wiring and I shouldn’t have to worry about wiring the pump?
Attachments
- Dec 13, 2020
- 927
- Pool Size
- 19600
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Jandy Aquapure 1400
It doesn't look like you'll need it, but just so you know the option is there, you can use a socket saver to ream the pipe out of a valve or existing fitting. New pipe can then be glued in with no couplers.
- Apr 10, 2018
- 6,544
- Pool Size
- 18375
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-45 Plus
No there’s isn’t a connection between the aqua pure and the timer, only from the salt system computer panel does the old Jandy cell connect to
- Apr 10, 2018
- 6,544
- Pool Size
- 18375
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-45 Plus
Okay I’m misunderstanding the conduit from the aqua pure controller of the salt cell does connect directly to the pump in the back.
I thought you were talking about the physical salt cell not the controller. I’m sorry I’m new to the terminology
I thought you were talking about the physical salt cell not the controller. I’m sorry I’m new to the terminology
- Apr 10, 2018
- 6,544
- Pool Size
- 18375
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-45 Plus
I understand. I'm not familiar with the Jandy system. I'd like to get Allen's input. He's East Coast still he'll probably respond in the morning.
Okay that’s fine I won’t be doing this until 5:30pm tomorrow anyhow but I’ll be active until then.
I really you guys helping me and confirming everything before I make a mistake. Thank you to everyone helping
- Apr 10, 2018
- 6,544
- Pool Size
- 18375
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-45 Plus
No worries. You can work on the plumbing and we can address the electrical tomorrow. We just need to find a way to switch your SWG on and off.
- Jul 21, 2013
- 66,419
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
No.
JEP-R is a VS controller, not a timer.
Show me where there is a connection between Aquapure and JEP-R?
the JEP-R is where I program when it turns on and for how long at what rpm etc, but there is no connection to the JEP-R other than to the Pump itself.
the JEP-R doesn't appear to be an issue at all, I'm wondering if the wiring from the pump to the CircuPool control module can be cut at the Aquapure connection and have a butt connect from those wires to the provided wires from the new CircuPool?
- Jul 21, 2013
- 66,419
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
The devil is in the details as to where and how you will create the high voltage connections.
Sorry, the Auqapure is already connected to the VS Pump, the CircuPool didnt come with near enough wiring so I thought what if I keep the connection that's already on the VS Pump as is and cut the connection from the old AquaPure side, butt connected it to the provided CircuPool wiring? just wanted to confirm that was fine
- Jul 21, 2013
- 66,419
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
Confirm what is fine?
What type of weatherproof connections will be used in what junction box?
Show us pictures of what you want your connect and how?
The existing wiring is in conduit, I would reuse the conduit that's been there for 12 years all the way up to the CircuPool
- Jul 21, 2013
- 66,419
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
okay so what do you recommend because the CircuPool came with 4' of wiring I need at least 12'
is it possible to open up the CircuPool and wire in the old wires directly to the CircuPool therefore not having any splices?
- Jul 21, 2013
- 66,419
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
You should be able to.
Open it up and take a look at how the supplied wires are connected