I put my Jandy multi-port valve in circulate and turned the pump on. earlier, I had backwashed so my backwash hose was still hooked up to the filter.
In circulate, I noticed that water was being pumped out the hose. I don't believe this is suppose to happen correct.
EArlier in the day, I had accidentally run the filter for about 2 hours in the closed position.
I hope I didn't do any damage.
Any thoughts?
Thanks
In circulate, I noticed that water was being pumped out the hose. I don't believe this is suppose to happen correct.
EArlier in the day, I had accidentally run the filter for about 2 hours in the closed position.
I hope I didn't do any damage.
Any thoughts?
Thanks