Hello all, my name is Mike and first time I am posting a question. I have an above ground pool with a Raypak 156a 150000 BTU heater. Only 1 year old. Has been working well but yesterday I started getting an ignition failure. The spark starts, it will light but seems late (meaning you can hear it lite about a second after the spark stops), then goes out immediately then back to spark. It seems like there is a pause between spark, late lite, and it does not register that it is been lit and turns gas off and starts ignition cycle again. Also, seems like sometimes it takes 2-3 sparks to light briefly then off again. I hope I am explaining to where you all understand. I thank you greatly for any ideas or solutions.