Hi everyone, I am in the EARLY stages of trying to get AqualinkD running so I can connect, monitor, etc. with Home Assistant. I got the recommended USB adaptor and can get data to show on it when running this script in the instructions - "sudo -s eval 'stty raw -echo < /dev/ttyUSB0; cat -vte /dev/ttyUSB0'", and I think I got it to install okay, but I am seeing this error in my log:
Error: RS Serial: Can't lock (/dev/ttyUSB0) (11): Resource temporarily unavailable
Error: AqualinkD: Error Aqualink setting serial port: /dev/ttyUSB0
Now, when I connected the USB plug, both my RS485 ports were used, so I just piggybacked onto one of them, keeping the original wires in there and putting in the two USB wires in there as well. Is this not allowed? I am wondering if there is some sort of mix up since there are two wires coming out of the RS485 D+ and D- ports.
Is this sort of a iAqualink OR AqualinkD type of thing or can I have both running? Clearly I have no idea what I am doing so any help would be great. Thanks!
Error: RS Serial: Can't lock (/dev/ttyUSB0) (11): Resource temporarily unavailable
Error: AqualinkD: Error Aqualink setting serial port: /dev/ttyUSB0
Now, when I connected the USB plug, both my RS485 ports were used, so I just piggybacked onto one of them, keeping the original wires in there and putting in the two USB wires in there as well. Is this not allowed? I am wondering if there is some sort of mix up since there are two wires coming out of the RS485 D+ and D- ports.
Is this sort of a iAqualink OR AqualinkD type of thing or can I have both running? Clearly I have no idea what I am doing so any help would be great. Thanks!