I'm getting ready to have pool refinished (wet edge Satin) and I have a question regarding the existing cap tile which is being removed. One of the estimates has replacing the existing cap tile. I have remodeled the pool deck a few years ago and we put travertine pavers over a concrete slab and we didn't use remodel overhanging coping, we use standard bullnose.
So the existing 2x6 bullnose which is u shaped is removed there will be 3 inch or so concrete slab lip under the 2x6 cap tile that would stick out. Seems like that would be a pretty big gap, any suggestions.
My pool remodeler suggest to remove cap tile and pull up new 6x6 tiles right below remodel coping which sits on a concrete slab. I have read here that the deck moves different from the pool and that's my concern. I believe I can find a smaller tile for maybe a strip right above the new tile. Am I overthinking this issue. We picked out tile and he is suppose to drain and start in the next couple of weeks.
Advise or suggestions please
I attached existing pic.
Thanks,
So the existing 2x6 bullnose which is u shaped is removed there will be 3 inch or so concrete slab lip under the 2x6 cap tile that would stick out. Seems like that would be a pretty big gap, any suggestions.
My pool remodeler suggest to remove cap tile and pull up new 6x6 tiles right below remodel coping which sits on a concrete slab. I have read here that the deck moves different from the pool and that's my concern. I believe I can find a smaller tile for maybe a strip right above the new tile. Am I overthinking this issue. We picked out tile and he is suppose to drain and start in the next couple of weeks.
Advise or suggestions please
I attached existing pic.
Thanks,