My psi is at 25 and I barely have any pressure coming into the pool through the return jet. Any idea what the problem is?
Pump
- Thread starter AmberRyan
- Start date
Did you change the plumbing?
Maybe the laterals got clogged when the multiport was plumbed backwards.
Does backwashing work now?
www.troublefreepool.com
Maybe the laterals got clogged when the multiport was plumbed backwards.
Does backwashing work now?
Backwashing
Hello! My pool has been cloudy since I’ve opened it done everything including just replace the head on my Hayward filter in. Now it will not backwash? Help please
www.troublefreepool.com
- Jun 22, 2014
- 52,036
- Pool Size
- 17888
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-45 Plus
I would also recommend posting a full set of water test results.
Please update your signature. There is nothing showing at the moment to describe your pool or equipment info. See my signature as an example.
Also see ---------> Create Your Signature - Further Reading
Please update your signature. There is nothing showing at the moment to describe your pool or equipment info. See my signature as an example.
Also see ---------> Create Your Signature - Further Reading
jgofnj
Silver Supporter
- May 28, 2013
- 414
- Pool Size
- 18500
- Surface
- Vinyl
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-40
I did! And yes!Did you change the plumbing?
Maybe the laterals got clogged when the multiport was plumbed backwards.
Does backwashing work now?
Backwashing
Hello! My pool has been cloudy since I’ve opened it done everything including just replace the head on my Hayward filter in. Now it will not backwash? Help please
Maybe a video of the issue would help us better understand what the problem is.
Maybe you need to take the filter apart and check the laterals for debris.
Maybe you need to take the filter apart and check the laterals for debris.
Hootz
Bronze Supporter
- Feb 5, 2018
- 374
- Pool Size
- 24000
- Surface
- Vinyl
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-60 Plus
What happens when you change the filter valve to recirculate? Does the pressure or flow rate change?
The psi increases when you switch to recirculate? How much? Confirm that please. (It's already too high at 25)
Similar threads
