Pump sometimes surges

Jul 14, 2016
23
Chesapeake/ VA
Pool Size
22000
Surface
Vinyl
Chlorine
Salt Water Generator
SWG Type
Hayward Aqua Rite (T-15)
This has been ongoing since I opened the pool in April. It’s not every day, it can be weeks between episodes. I’ve backwashed the filter, kept the skimmers clean, changed the o ring in the pump basket, blown out the skimmer lines, checked for air leaks, and made sure the water level has been maintained. It had been running well for the past 2 weeks and running well all day yesterday, then out of the blue, it started surging. I had not done anything to the pump. This morning, it’s running normally again. I’m at a loss as to what the problem is.
 
Last edited:
My pump was not fully priming yesterday after I backwashed, I was so confused. Checked the skimmer while it was running & still not priming and the water level just wasn't high enough, weir door was allowing air into the skimmer line. Let it fill back up to 1/2 up the skimmer and it stopped. I hope your solution is as simple!
 
  • Like
Reactions: PoolStored
The water level is 1/2 way up the skimmer, where I’ve always tried to keep it. I’ll add add more while the pump is running to see if it makes a difference. I checked the skimmer weirs, and they are freely moving. I appreciate all the suggestions.
 
Last edited:
  • Like
Reactions: Antlo
Your signature contains no information about your pool. Please provide details.

Post pics of your equipment pad and pool and skimmers.
 
I’m sorry, I thought all this info was listed in my profile. It’s a 22,000 gallon vinyl liner pool. 1.65 hp Pentair Challenger pump, Hayward sand filter, Hayward swg
 

Attachments

  • IMG_5680.jpeg
    IMG_5680.jpeg
    557.2 KB · Views: 4
  • IMG_5683.jpeg
    IMG_5683.jpeg
    266.9 KB · Views: 3
  • IMG_5681.jpeg
    IMG_5681.jpeg
    358.5 KB · Views: 4
  • IMG_5682.jpeg
    IMG_5682.jpeg
    638.6 KB · Views: 4
I’m sorry, I thought all this info was listed in my profile. It’s a 22,000 gallon vinyl liner pool. 1.65 hp Pentair Challenger pump, Hayward sand filter, Hayward swg
Your signature is different then the profile and says…

2007 Hot Spring Prodigy, 325 gal. Just changed the water Nov 23, 2019, using the Frog sanitizing system, lines purged last spring. I test the water with Taylor's.
 

Enjoying this content?

Support TFP with a donation.

Give Support
Your signature is different then the profile and says…

2007 Hot Spring Prodigy, 325 gal. Just changed the water Nov 23, 2019, using the Frog sanitizing system, lines purged last spring. I test the water with Taylor's.
Ok, I didn’t realize that. I provided the information & pictures earlier.
 
Thread Status
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.