Pump power question

[knlckers]

Hi!

I have an 18ft above ground.
Filter: jacuzzi cfr75 cartridge
Pump: jacuzzi power-mizer s1Lgt9-3-L8
A.o. Smith 2spd hp1 7-186554-01
Intermatic timer unsure if p1131 or maybe p1101

This setup was given to me and I'm trying to get my pool up and running with it. Got everything hooked up...but no power to the pump. I have verified the power is working in the outlet I'm using.

The pump has a twist lock plug... Wondering if I should try a new timer? Or if I should/could just get an adapter and plug straight in without the timer? Is that possible since it's 2 SPD?

Any help is super appreciated! Trying not to invest a ton of money since I will likely be spending enough on chlorine bc I have floating algae... But that's another post. ?

 

[Bama Rambler]

Can you post some pictures of the pump and timer? Try to include the data plate on the motor?

 

[knlckers]

 

[knlckers]

Can you post some pictures of the pump and timer? Try to include the data plate on the motor?

Just put below

 

[knlckers]

Oops here's the timer. Don't have the backside for more info, though - can get that later if needed

 

[Bama Rambler]

Did the people you got it from tell you that it worked as a unit when they had it?
It appears that the pump has a switch under the back cover. Have you tried it in both hi and low speeds?

 

[knlckers]

Did the people you got it from tell you that it worked as a unit when they had it?
It appears that the pump has a switch under the back cover. Have you tried it in both hi and low speeds?

You are the best!! I didn't know that switch was back there. My last jacuzzi one didn't have anything. Just was always on (unless there's another switch I didn't know about. But I looked and didn't see one) thank you so much! I was about to waste so much time

 

[Bama Rambler]

I'm glad that it was a simple issue.