I am Totally at a loss- and feel like I have tried everything. Hoping someone here can help. I have an Intelliflo VF, Easytouch 8, and ScreenLogic2. When in Auto mode my pump has “display not active” so the easytouch and pump are communicating. I currently have one schedule to the pool only from 8:00 to 8:00. I have Checked all circuit names and circuit functions. Circuit 1/18 is spa/ spa master, circuit 2 is pool/master pool. The intelliflo is programmed with VF, circuit = pool, flows are scheduled, status says “no comm”. I have An expansion comm board, with the pump wires to the terminal labeled J20 with only the yellow and green connections. When I hit the air blower, that comes on and off. The ScreenLogic also still controls the air blower. So it seems that the comm board and screenlogic aren’t the problem. When I put the easytouch in timeout- the pump works perfectly. Anyone have any ideas?