Hey Pool Fam. In the last several months have had capacitor go out and replaced twice (pump wouldn't start only hum). A month after the second replace, the pump now won't start, no sound, nothing. Reading through some prior discussions here, I took a crack at looking at the motor hoping it was just a pressure plate stuck or something. Pic attached. It looks bad to me, like what a burnt up motor would look like.
Can it be confirmed from the pic that the motor is DOA? If not, anything else to check?
If so, is it a fairly straightforward replacement for someone pretty handy? Any issues to consider? I have emailed a pool supply company for recommendations based on the specs.
Thank you.
Can it be confirmed from the pic that the motor is DOA? If not, anything else to check?
If so, is it a fairly straightforward replacement for someone pretty handy? Any issues to consider? I have emailed a pool supply company for recommendations based on the specs.
Thank you.