Pouring Chlorine Into Liquidator Going Slow? Fill Tube Might Be Clogged

Chuck_Davis

Gold Supporter
LifeTime Supporter
Aug 6, 2010
162
Durham, NC
This snuck up on me over 7-8 years, so I didn't notice it happening. In hindsight, I had to wait longer and longer between small pours of chlorine into the funnel and fill tube. Finally the funnel filled up and wouldn't drain.

I discovered that the bottom of the fill tube had become clogged with crystalline crud. I cleaned it out with a piece of brazing rod, but a well-straightened coat hanger would work.

Now I can pour in a whole gallon of chlorine in around 30 seconds.
 
  • Like
Reactions: JohnT and jtburf
Thread Status
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.