PoolMath bug iOS + feature request

[acKsw]

Both of these entries were added at the same time but one of them was catching up for the day before.. so “2 days ago” is Jan 28, when I put the log in, not the actual date of the chemical add (Jan27 per RHS) - it’s a bit confusing.

Also would be great to have the ability for PoolMath to:
1) have an option for liquid chlorine (I know it’s the same chemical), and
2) remember if I have changed the concentration of the chemical and use that value when adding again (eg liquid chlorine is 13%. Every time I go to add bleach it defaults back to 6%.. but if I do add bleach the local stuff here would only be around 4%. It’s a lot of repetitive re-entry to keep correcting something that I can’t change).

 

[ajw22]

@Leebo should be around soon.

 

[Leebo]

2) remember if I have changed the concentration of the chemical and use that value when adding again (eg liquid chlorine is 13%. Every time I go to add bleach it defaults back to 6%.. but if I do add bleach the local stuff here would only be around 4%. It’s a lot of repetitive re-entry to keep correcting something that I can’t change).

Try this as you’re slightly adding chlorine opposite of the expected behavior.......even though it’s also how I add.

Go into the FC Tile and insert into the “Bleach Chlorine %” field that you’re using 14% and hit done. That field should be saved and update through the the App.

 

[acKsw]

Oh I see the other way of adding chlorine now. Thanks, I'll try that one next time and see if it "sticks"