Pool Pilot Soft Touch

[Mr2uyen]

Hello All,
Hope all is well with everyone.
I have pool pilot soft touch and it had been running well over the past decade or so. This came with the house when we moved in. Start on the month I noticed there’s no power to the main box(?). I looked on the internet and some said it might be burnt fuse. I opened the unit this afternoon and the fuse is good. I think the motherboard is toast. Is there a replacement part for this? Also looked this up and only the control board shown up. Here are some photos of the mother board.

Thank you for your time and advice.

Tee

 

[mknauss]

Welcome to the forum.
See AutoPilot SWG - Further Reading

There is a link in the article to a company that is known to have parts for the Pool Pilot systems.

 

[Mr2uyen]

Thank you for the response. I’ll be replacing system with something else.

I called for quotes, three pool companies responded with these systems:

Auto Pilot ChlorSync CS30
Pentair IChlor 30
Purechlor (I’ll update the model)

I’ve been doing searches on reviews and there’re mixed. Your thoughts on these are very much appreciated.

Thank you,
Tee

 

[mknauss]

If you are replacing the entire system, look at Circupool or Hayward Aquarite. Do not get a Pentair iChlor - too many problems seen with that. You do not show what volume of pool you have but be sure the cell is rated for a minimum of 2X your pool volume.

 

[Mr2uyen]

Thank you for the response, I updated my profile to include the equipment I have (to the best of my knowledge).
Pool size/shape is a 15,000 gal kidney shape.

 

[mknauss]

Your Profile shows 17000 gallons.

Add a signature. It provides better information than the Profile. See Create Your Signature - Further Reading