OK -- I confirmed that. So, lets find a SWCG that creates close to that amount until such time as our app designer can update the list.Astral EC35 output equals 1.85 lbs per day. I noticed that the output does not calculate the input of hard numbers but only numbers from the list.
I have a request for a tweak to the SWG chemical addition logic if possible. It doesn’t let you enter a % that will yield less than .1ppm of FC. So if I set it at 1%, it may not take it if the hours are not high enough. So I’d request to be able to enter hours/% that yields 0 ppm. And also to be able to enter a 0% (maybe these are one in the same).
My main reason for the request is I’d like to enter when I go from what I was at %-wise at my last entry, to 0%. If my FC gets too high, I set it to 0. It would be nice to be able to scan the logs and see when it went from say 50% to 0% so it would be in the same format at the previous “addition”. I could make a note but it’s much easer to scan for similar text.
If not possible, no worries, just a request.
Not sure where this belongs, but I noticed that some of the Muriatic Acid selections in the "Effects of Adding" page of the IOS app don't seem to be working.
Specifically, any of the "XX.X% (XX° Be) Muriatic Acid" ones. They all say "No significant changes to the water chemistry" regardless of the volume you enter.
The "XX.XX% Muriatic Acid" selections work fine.
As a second question (not so much a bug), I get that "Borax (20 Mule)" and simply "Borax" should yield the same result, but how come "Tetraborate Pentahydrate" yields a different result? That is simply the chemical name for Borax, so shouldn't it be the same?