pool math app doesn't show swg configure recommendation for FC

[mcleod]

CYA is 70. The target for FC is 5. I have a SWG (PENTAIR). When I go to the recommendation section it reads. "Not enough information to provide accurate advice." All of the conditions are filled in– type, brand, output, and SWG %. I've changed parameters but the recommendations remain the same. I'm puzzled. Reload the app, perhaps.

McLeod

 

[mknauss]

Share your Poolmath data so we can see what data you have entered.

 

[mcleod]

Share your Poolmath data so we can see what data you have entered.

FC:4.
OC:.5
pH: 7.8
TA: 80
CYA: 70
Salt: 3800
Temp: 85

 

[mknauss]

OK -- can you share the actual Poolmath through the app?
You have to have your SWCG set up in Settings.

 

[mcleod]

OK -- can you share the actual Poolmath through the app?
You have to have your SWCG set up in Settings.

How do I do that?

 

[mknauss]

Settings (cogwheel upper right), Sharing. Select link from TroubleFreepool.com user profile.

Your login information for Poolmath and TFP forum must be the same.

 

[mcleod]

How do I do that?

Settings (cogwheel upper right), Sharing. Select link from TroubleFreepool.com user profile.

Your login information for Poolmath and TFP forum must be the same.

Sharing is turned on to the user profile from TFP. No indication as to how to share. Export logs only gives me a spinning circle. I don't use a login on my phone app

 

[mknauss]

If you are using the free Poolmath version, you cannot share.

You can enter the test data. One test. And get basic functions using the free version.

 

[mcleod]

If you are using the free Poolmath version, you cannot share.

You can enter the test data. One test. And get basic functions using the free version.

I will look foward to upgrading