Pool Build Photos

Northern cannonball

Bronze Supporter
Sep 12, 2021
147
Toronto, Canada
Pool Size
9250
Surface
Vinyl
Chlorine
Salt Water Generator
Hey everyone,
Been meaning to post these photos for a while now :p. Here are some photos of my pool build, start to finish! There was a week delay due to the ridiculous amount of rain we apparently receive during the Canadian summer ;) Overall quite the experience. The installers probably weren't thrilled with the steep hill and the tight space, but they nailed it.
2021-07-05_08-16-20_659.jpeg


2021-07-05_16-07-20_312.jpeg2021-07-05_16-08-38_872.jpeg2021-07-05_16-10-53_467.jpeg2021-07-06_17-49-04_189.jpeg2021-07-06_17-49-46_643.jpeg2021-07-14_13-50-20_705.jpeg2021-07-14_13-51-59_584.jpeg2021-07-16_20-12-43_356.jpeg2022-06-04_17-37-56_202.jpeg
 
Nice, how many days start to finish?
Hey Allen,
I believe it was around 10-12 days from excavation to when they poured the concrete around the pool. There was several days where they couldn't work due to rain. Once the concrete was poured we had a landscape company in to lay the pavers etc., and that was about 4-5 business days, then they put in the liner. Here is the slope they had to contend with.

2021-07-05_16-32-41_314.jpeg
 
Do you have the mineral cartridge in that Nature2 unit?

Ya, I never took it out and don't plan on replacing it. I asked the pool company for the cap so i can take it out and just cap it, but they didn't have one kicking around. wish i asked for it during the install...
 
NICE!!!

What did you do to block the dirt and rain water from coming down the slope?
Not much lol. Lots of water rain down the slope into the pool. Once the weather eventually changed they had some draining to do. The slope was eventually graded so the water runs off to the side and down the property line.
 
  • Like
Reactions: kimkats

Enjoying this content?

Support TFP with a donation.

Give Support
Thread Status
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.