So this website has been very good to me these last few weeks. I recently built a pool that finished in January. Wanted to drop a photo of the plaster and pool thus far. Im sure I’m crazy OCD but wanted to make it’s nothing more serious. On the sun shelf and floor of the pool there are still areas where the plaster itself seems to be more thick and not as dark or as much pebble showing as others. My chemistry has been spot on and I log it in excel weekly. Here are some photos. Anything I should be worried about or does it just take time for the bottom to fully cure? I have logged my pool usually has a TC loss of 1ppm per day and PH stays around 7.5 for the week. Once I use liquid chlorine the PH jumps but then I put acid in 45 mins after so it doesn’t have enough time to stay that high ( usually jumps to 8.2) as my CYA is 60 so I keep 7-9 FC at all times. If it gets lower due to use or sun I’ll drop 1.5 gallons of liquid Chlorine or so which pops it up pretty quick.
Am I being crazy or no?
Am I being crazy or no?
