PL4/PSL4 Control Panel

[Hopps]

Lost connection remote connection to my PSL4 Panel present Easytouch software: 1.020 and boot 1.010 based on the information on web site I need to upgrade software first to 1.047 and then to 1.067 but the instructions suggest that I upgrade using USB port on panel but there are no USB ports on the panel. I cannot find any instruction on upgrading software without using USB port. I assumed that it would be an option on the setup display but cannot find it am I missing something??

 

[Jimrahbe]

H,

I think you are confusing your EasyTouch lite with the New IntelliCenter. There is no DIY upgrade for your software.

Tell us where you got that info???

Thanks,

Jim R.

 

[Hopps]

"I lost my Screenlogic Connect app. (iphone) connection last week. Kept getting the "searching for controller" message. Per Pentair website I needed to update my firmware to 1.067 and use the new intellicenter2 application. If this is not correct, I should still be able to connect to the Easy Touch Controller. I checked my Screen logic Interface based on the led lights the unit is connecting to the remote receiver and transmitting data. What am I missing??

 

[Jimrahbe]

H,

Try this page..

ScreenLogic2® Update Instructions

Stay up to date with the newest software. Download the latest versions of our software here.

www.pentair.com

Thanks,

Jim R.