I'm going to be rebuilding my suction-side manifold, and have FOUR pipes that are about 8 inches under the pool water level. #1 skimmer, #2 vacuum robot, #3 main drain, #4 spa drain. I expect I could temporarily use pool side plugs for #1 and #2, but is there a way to block the drains? Otherwise I would have to use a wet PVC glue, and cut, deburr, bevel, clean and glue while the water is running out. That's possible, but messy. (I could lower the pool by 10 inches also ...)
Thanks for suggestions!
Thanks for suggestions!