Just had the pool water tested and ph is 7.6. I was told to add 16.9 pounds of alkalinity increaser. If ph is in the ideal range why would they tell me to add that?
Yup! First and foremost is pool owner testing. We've found that pool store testing is often (more than you'd think!) inaccurate due to a variety of reasons, yet no one is going to be as concerned with accuracy more than the pool owner.
Which means you need a GOOD test kit and there are only two we endorse. The TF-100 (my personal fave) or the Taylor K-2006C. Both can be found at tftestkits.net
The TF-100 runs about $70 but will save you much more because you won't mistakenly be adding chemicals you don't need!
We need to know (and these kits will tell you):
FC
CC
pH
TA
CH
CYA
Please consider getting one ASAP and we'll walk you thru all the tests and the results.
Yay! Ok, it shouldn't take too long to arrive as they ship out of NC. So sometime this week I bet! Get us those test results and we'll ponder them with ya.
They like to sell you over priced baking soda so later they get to sell you dry acid to lower the pH, then since you used too much dry acid, more baking soda and/or new equipment from the dry acid
Once your test kit arrives and you start doing, it will make start to make sense. Two, three weeks and you'll be a pro at testing and already have a pretty good idea of what does what and even roughly how much you'll need. By the time school lets out, your pool will be clearer and more sparkling than you thought possible. No smell, no itchy skin, no burning eyes, no cloudiness, no green. I kid you not.
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.
Welcome to TFP! For a wealth of pool care information please check out our free Pool School. If you are in need of specific help then we encourage you to Register and ask us here in the forum!