- Aug 6, 2018
- 53
- Pool Size
- 7900
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-20
Hello,
My Master Temp 400 kicks in, I smell gas and hear the pilot trying to start it.
It tries this a couple times and eventually gives the service heater LED.
When opened up, the only alarm LED is LED 11, which I believe to be service heater as well.
I've seen another thread which mentions that the drum at the bottom (burner) could have water in it. Due to the heavy rains and the chimney proximity beside the slanting roof of a shed, I'd like to check for this.
Could someone verify if I undo the bottom bolt on the right, not the one facing me?
My Master Temp 400 kicks in, I smell gas and hear the pilot trying to start it.
It tries this a couple times and eventually gives the service heater LED.
When opened up, the only alarm LED is LED 11, which I believe to be service heater as well.
I've seen another thread which mentions that the drum at the bottom (burner) could have water in it. Due to the heavy rains and the chimney proximity beside the slanting roof of a shed, I'd like to check for this.
Could someone verify if I undo the bottom bolt on the right, not the one facing me?