Hello I am not sure how it happened but my pentair water indoor remote thing switched the buttons around. I used go be able to switch to spa mode and pool mode. I also used to be able to turn on my spa blower. Spa on used to be button 1 then bubbler/blower then lights. Now it's lights as number 1 button 2 turns on my aux 3 which does nothing and the other 2 don't do anything.
Is there a trick to remapping or retraining the buttons? Ideally button 1 would do what the V button does on the outdoor panel which switches from spa to pool. And button two would activate aux 1 which is the spa blower. And button 3 would activate aux 2 which is the lights.
Is there a trick to remapping or retraining the buttons? Ideally button 1 would do what the V button does on the outdoor panel which switches from spa to pool. And button two would activate aux 1 which is the spa blower. And button 3 would activate aux 2 which is the lights.