New to pool care. I live in NC weather pretty nice al year round. Our pentair swg pool is 15000 gals. We have a pop liner which has been good for about 4 years. We leave it uncovered year round. We recently have had to replace the salt cell. Since that time the sanitizer output light has been flashing. Does anyone know how to stop it or recommend any solutions?
Pentair SWG owner
- Thread starter Donna49
- Start date
- May 3, 2014
- 59,722
- Pool Size
- 6000
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-40
Welcome to the forum!
If the % lights on an Intellichlor are flashing it is set for less than 10% generation. If you do not have automation, use the More button to raise the % setting to 20% or above and the lights will stop flashing.
I suggest you read ABC's of Pool Water Chemistry.
If the % lights on an Intellichlor are flashing it is set for less than 10% generation. If you do not have automation, use the More button to raise the % setting to 20% or above and the lights will stop flashing.
I suggest you read ABC's of Pool Water Chemistry.
Similar threads
