I have a 5-year-old Superflo VS. It primes for five minutes, then runs at specified lower speed for an hour or so, then restarts, reprimes, runs again for a while, then stops with Error Code 1A. My pool guy says I need new motor, Pentair Customer Support says it's a Drive problem. I've read that it might be a motor issue, but the motor's not shot. Dunno whether to replace the motor, or the Drive, or what.
Pentair Superflo VS Error Code 1A
- Thread starter nshain
- Start date
- Jul 21, 2013
- 52,851
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
Welcome to TFP.
www.epoolsupply.com
1A - Power Module over current detected
1A – Power Module over current detected: If this error displays multiple times, then there may be a problem with the pump’s rotating assembly. Please disassemble the pump and investigate to see if there is a problem with the impeller or mechanical seal. See page 14 “Pump Disassembly” for instructions for disassembling the pump.
Tech Tuesday: Pentair Superflo VS Error Codes
Error Codes Key for Pentair Superflo VS Pump Below is a list of all the error codes that Pentair has provided for error codes on a Pentair Superflo VS pump. These codes are a great way to do a simple diagnostic to see what issues your pump is having. Decoding the errors on your pump 21 -...
www.epoolsupply.com
1A - Power Module over current detected
1A – Power Module over current detected: If this error displays multiple times, then there may be a problem with the pump’s rotating assembly. Please disassemble the pump and investigate to see if there is a problem with the impeller or mechanical seal. See page 14 “Pump Disassembly” for instructions for disassembling the pump.