Hello,
Our Pentair Intelliflo Variable Speed Pump keeps lowering the RPMs on it's own. I assigned the following RPMs to these buttons.
Button #1 = 1000 RPMs
Button #2 = 2000 RPMs
Button #3 = 3000 RPMs
Button #4 = 3450 RPMs (maximum output)
I run the pump from 9am to 3pm daily at 2000 RPMs, but have noticed on numerous occasions within the past few months the pump will have lowered itself to 1000 RPMs.
I cleared previous pump programming (or thought I did) per instructions here on TFP and re-programmed it with the above settings but it is still doing it.
Any suggestions?
Thanks,
Mike
Our Pentair Intelliflo Variable Speed Pump keeps lowering the RPMs on it's own. I assigned the following RPMs to these buttons.
Button #1 = 1000 RPMs
Button #2 = 2000 RPMs
Button #3 = 3000 RPMs
Button #4 = 3450 RPMs (maximum output)
I run the pump from 9am to 3pm daily at 2000 RPMs, but have noticed on numerous occasions within the past few months the pump will have lowered itself to 1000 RPMs.
I cleared previous pump programming (or thought I did) per instructions here on TFP and re-programmed it with the above settings but it is still doing it.
Any suggestions?
Thanks,
Mike