Pentair Pool app no longer allows SWG during spa mode

[ScudBar61]

I noticed on the the Pentair Pool App, there is no longer an option for SWG percentage for spa mode. I verified that my IC40 no longer produces when in spa mode. I know previously you could choose up to 20% during spa operation. I sent the question to Pentair support, but they never answered the question. Any ideas on why they did that?

 

[ajw22]

 

[ajw22]

 

[Jimrahbe]

Scud,

My Android app works..

If I am in the Pool mode, it shows the SWCG output for just the Pool..
If I am in the Spa mode, it shows the SWCG output for just the Spa..

If I go to Chemistry and edit, it will allow me to set both the Pool output and the Spa output..

Thanks,

Jim R.

 

[ScudBar61]

This is what my Pool app looks like

 

[ScudBar61]

This what it looks like under Pool (IOS app)

 

[Jimrahbe]

Scud,

To see the spa SWCG output, you have to put the system into the spa mode..

Push the button...

Jim R.

 

[ScudBar61]

If I go into Intellichlor output, it only lets me put in pool SWG output, no Spa

 

[ScudBar61]

Here’s Spa mode selected. No chemistry button

 

[ajw22]

Scud,

To see the spa SWCG output, you have to put the system into the spa mode..

Push the button...

Jim R.

Not on the IOS app.

My spa is not in SPA mode when I clipped these screens...

 

[ajw22]

Check that the IntelliChlor Body of Water says Pool/Spa.

My bet is yours just says Pool.

 

[ScudBar61]

Jim, my app use to do exactly as yours. Edit chemistry and it would allow you to do both pool and spa. Now it won’t.

 

[ScudBar61]

Ahhh. The light bulb just came on. In advanced settings, somehow my Intellichlor got set to Pool, not Pool/Spa. Works now. Thanks for the help!!